SOCASpecial Oils Central Asia
ҚАЗ РУС ENG
Request a quote

Ergon products

Transformer and base oils

Key characteristics are below. Full technical data sheets (TDS), safety data sheets (SDS) and certificates are available on request.

Transformer oil

Ergon HyVolt III

Inhibited, severely hydrotreated naphthenic insulating oil for power and distribution transformers.

Packaging: ISO tank, 1,000 L IBC

Ergon oils are approved by: Hyundai Electric, ABB, Siemens, Toshiba, Fuji Electric →
Typical values
StandardIEC 60296:2020, Type A, inhibited
Basenaphthenic, severely hydrotreated
Breakdown voltage, 2.5 mm55 kV before / 75 kV after treatment
DDF at 90 °C0.0004
Water content14 mg/kg
Pour point−53 °C
Viscosity at 40 °C9.6 mm²/s
Flash point (PMCC)146 °C
Inhibitor0.38 %
Miscibilitywith inhibited IEC 60296 Type A oils: 10:90, 50:50 and 90:10 blends meet the standard
Corrosive sulfurnon-corrosive
DBDS, PCBnot detected

Synthetic ester

Ergon HyVolt SE

Synthetic ester insulating fluid with a high fire point. For transformers inside buildings, at industrial sites and in environmentally sensitive areas.

Packaging: IBC

Typical values
Standardsexceeds IEC 61099 and ASTM D8240
Fire safety class (IEC 61039)K3
Fire point314 °C
Net calorific value31.2 MJ/kg
Flash point (COC)258 °C
Breakdown voltage72 kV
Pour point−56 °C
Water content52 ppm
Biodegradabilitybiodegradable (OECD 301)

Base oils

Ergon HyGold 60 / 100

Severely hydrotreated naphthenic base oils for lubricant manufacturers: metalworking fluids, industrial and hydraulic oils, greases.

Packaging: ISO tank, 1,000 L IBC

HyGold 60, typical values
Viscosity at 40 °C9.6 cSt
Pour point−64 °C
Flash point (PMCC)141 °C
Density at 15.6 °C0.8857 g/cm³
Sulfur44 ppm
Acid number0.01 mg KOH/g

Need a TDS, SDS or a sample?

Tell us the product and the task — we will send documents and a quote.

Request documents